| EG01 | Contributions to the Physio-Chemical Characterization of Mezam Sand |
| EG02 | A REMOTE CCTV AND DISTRIBUTION AMPLIFIERS MONITORING AND CONTROL SYSTEM FOR VIDEO SIGNALS DISTRIBUTION IN THE CASE OF SWECOM PLC KUMBA |
| EG03 | NON CONTACT MEASUREMENT OF VERNONIA AMYGDALINA BITTERNESS FOR SCRUBBING MACHINE CONTROL |
| EG04 | BIOMETRIC FINGERPRINT BASE EXAM HALL AUTHENTICATION USING Wi-Fi ESP8266 |
| EG05 | DESIGN AND IMPLEMENTATION OF SMART DOOR SECURITY SYSTEM |
| EG06 | HOW DOES GPS AND GSM MODULE WORK?: CAR TRACKING SYSTEM USING GSM-GPS AND MICROCONTROLLER |
| EG07 | DESIGN AND IMPLEMENTATION OF A WIRELESS COMMUNICATION PLATFORM AND ITS APPLICATION TO SCHOOL ATTENDANCE |
| EG08 | Design and Realization of a Module of Control House Automation and Monitoring of Dwelling by Android Phone |
| EG09 | Design and Realization of a Module of Control House Automation and Monitoring of Dwelling by Android Phone |
| EG010 | Design and Implementation of Microcontroller (16f887)-Based Controlling of Power Factor Using Capacitor Banks |
| EG011 | conception and realization of moist heat sterilizer (autoclave) |
| EG012 | Conception and Realization of a Cassava Dryer Using Electricity, Solar Panel and Biomass Energy |
| EG013 | Design and Realization of a Didactic Bench of a Complete Electrical Starting, Signalization and Sunroof System of a Vehicle |
| EG014 | Detection of underground cable fault using arduino |
| EG015 | FILE TRACKING SYSTEM |
| EG016 | Production of biogas as a heating resource for local domestic use: How we can generate biogas for our domestic use |
| EGO17 | DESIGN AND IMPLEMENTATION OF SALES FORECASTING SYSTEM |
| EG018 | AN ASSESSMENT OF MAINTENANCE OF WORKSHOP EQUIPMENT |
| EG019 | AN ASSESSMENT OF STUDENT UNDERSTANDING OF THE PRINCIPLE OF FLUID MECHANICS AND THE NUMERICAL PROCEDURE IN CFD |
| EG020 | ASSESSING THE FABRICATION AND CONSTRUCTION OF WINDOW BURGLAR PROOF |
| EG021 | ASSESSING REAL TIME SCHOOL BUS TRACKING SYSTEM USING (RFID) |
| EG023 | ASSESSING THE INSTALLATION OF COMPUTER SYSTEMS AND RESUSCITATION OF COMPUTER LABORATORY |
| EG024 | The Design and Fabrication of the Domestic Deep Freezer |
| EG025 | DETERMINATION OF THE CAUSES, EFFECTS OF ENVIRONMENTAL POLLUTION AND ITS POSSIBLE CONTROL |
| EG026 | ANALYSING THE DESIGN AND FABRICATION OF GROUNDNUT SHELLING MACHINE |
| EG022 | AN ASSESSMENT OF THE REHABILITATION AND FURNISHING OF COMPUTER LABORATORYS |
| EG027 | INVESTIGATION INTO THE CAUSES AND REMEDIAL MEASURES OF PAVEMENT FAILURE |
| EG028 | AN EVALUATION OF THE MAINTENANCE OF URBAN INFRASTRUCTURES |
| EG029 | INVESTIGATION INTO THE SUITABILITY OF SAND AND GRAVEL MATERIALS COMMONLY USED IN BUILDING CONSTRUCTION |
| EG030 | AN ASSESSMENT OF OPERATION AND MAINTENANCE OF STEAM BOILER |
| EG031 | CRITICAL EXAMINATION INTO THE PROBLEM OF SHORT LIFE SPAN OF DOORS |
| EG032 | EVALUATING THE FABRICATION OF ELECTRICAL POP CORN MACHINE |
| EG033 | ANALYSING THE DESIGN AND FABRICATION OF A PORTABLE CASSAVA GRATER |
| EG034 | INVESTIGATION INTO THE CAUSES, EFFECT AND PREVENTION OF CRACKS IN BUILDING |
| EG035 | EVALUATING REMODELLING OF CONFERENCE ROOM, FLOOR FINISHES, WINDOW AND FURNITURES |
| EG036 | ASSESSING THE PRODUCTION OF ALUMINIUM POTS |
| EG037 | IMPLEMENTATION OF REAL TIME INFORMATION MANAGEMENT FOR INSTITUTE OF TECHNOLOGY (I.O.T) |
| EG038 | ASSESSING THE CONVERTING OF WASTE TYROS INTO USEFUL PRODUCTS IN AN ENVIRONMENTAL FRIENDLY MANNER |
| EG039 | SUITABILITY OF AVAILABLE LATERITE MATERIAL IN ILORIN EAST LOCAL GOVERNMENT AREA FOR ROAD CONSTRUCTION |
| EG040 | ANALLYSING THE DESIGN AND CONSTRUCTION OF ELECTRONIC SCROLLING MESSAGE DISPLAY BOARD WITH BACK UP BATTERY |
| EG041 | EVALUATING THE EFFECT OF STREET TRADING ON TRAFFIC PERFORMANCE AND CONTROL |
| EG042 | conception and design of a drainage system at the kumba main market |
| EG043 | DESIGN AND REALIZATION OF A MOTORIZED MECHANIZED CAR JACK WITH A REMOTE CONTROL |
| EG044 | Conception, Design, and Realization of a Convertible Study Table |
| EG045 | DESIGN AND IMPLEMENTATION OF AN ONLINE VEHICLE |
| EG046 | SAFETY ENVIRONMENTAL AND RISK MANAGEMENT ASSESSMENT IN ARTISANAL MINING. CASE STUDY; BELLEL, ADAMAWA REGION OF CAMEROON |
| EG047 | RECOVERY OF GOLD WITH RESPECT TO THE ANGLE OF INCLINATION OF THE SLUICE BOX. CASE STUDY: ARTISANAL GOLD MINING ESEKA CAMEROON |
| EG048 | DESIGN AND REALIZATION OF A SEMI-AUTOMATIC UNMANNED AERIAL VEHICLE SANITIZATION DEVICE |
| EG049 | MOBILE APPLICATION FOR FINANCE INSTITUTION |
| EG050 | Food Management and Donation Application System |
| EG051 | The Effects of Hygroscopic Behaviour of Entandrophragma cylindricum (Sapele) in South West Cameroon |
| EG052 | DEVELOPMENT OF A WEB BASED APPLICATION FOR STUDENTS INTERNSHIP PLACEMENT AND MANAGEMENT OF HTTTC KUMBA |
| EG053 | Design and implementation of Computerized Supermarket Management System |
